<big id="fdfpb"></big><big id="fdfpb"><progress id="fdfpb"><font id="fdfpb"></font></progress></big>

      <big id="fdfpb"><sub id="fdfpb"><thead id="fdfpb"></thead></sub></big>

      <big id="fdfpb"></big>
              <address id="fdfpb"><thead id="fdfpb"></thead></address><big id="fdfpb"><progress id="fdfpb"><meter id="fdfpb"></meter></progress></big>

              <progress id="fdfpb"><meter id="fdfpb"><menuitem id="fdfpb"></menuitem></meter></progress>

              <address id="fdfpb"></address>

              Product Center 產品中心

              產品中心

              當前位置: 首頁 > 產品中心
               PE27 濕固化環氧云鐵防銹漆
              來源: 點擊數:1600次 更新時間:2023/7/7 14:45:27

              產品名稱:OMELON PE27
              產品介紹:
              GENERAL
              PE27 can used be in the moisture condition as an additional layer for anticorrosive coating. which will enhance sealing and anti-corrosion properties. It’s possessed of higher sealing property. In addition, it forms a coating with good resistance to heat and corrosion , this paint is able to match with most pain
              總述
              PE27 用于在潮濕環境施工的中間涂層。增加封閉性和防腐蝕性能。具有較高的封閉性,耐熱性和防腐性良好。與大多數涂料配套。
              RECOMMENDED USES
              steel structure and concrete
              推薦用途
              適用于各種鋼結構和混凝土
              SPECIFICATION DATA
              技 術 參 數
              Vehicle Type/Pigment Type
              Modified epoxy
              漆料類型/顏料類型
              改性環氧
              Colors .
              grey
              顏色
              Mixing ratio
              By weight: 10(base) to 1(curing agent);
              混合比率
              重量比10(基料):1(固化劑)
              Curing agent
              PE27C01
              固化劑
              PE27C01
              Specific gravity(mixture)
              1.42±0.05Kg/dm3 (23℃/73.4℉)
              比重
              1.42±0.05公斤/立方分米
              Volume of Solids
              65% (Theoretical)
              體積固體份
              65%(理論上)
              Flash point(Abel)
              Base:>23°C;Curing agent:>40°C
              閃點
              基底>23°C;固化劑:>40°C
              Theoretical covering capability
              6.5 Sq.m/Lt. at 100 microns (4mils)
              理論覆蓋能力
              6.5平方米/ 升
              Typical film thickness per coat
              Wet:154 microns (6 mils) ;Dry:100 microns (4mils)
              單層膜厚
              濕膜:154um;干膜:100um
              Application method
              Brush, Roller or Airless Spray
              施工方法
              手刷、滾輪刷、無氣噴涂
              Thinner
              Product: TH03- Cleaning: TH03
              稀釋劑
              產品:TH03; 清潔劑:TH03
              VOC
              285 grams/Lt.
              揮發性有機化合物
              285克/升.
              Pot Life (at 23°C /73.4℉)
              4h at 23°C (73.4℉)
              混合使用期
              23°C (73.4℉)時4h
              Drying time
              Surface dry: 2 hours at 23°C (73.4℉)
              干燥時間
              表干:23°C (73.4℉)時2小時
              Overcoating time
              Min:10 hours at 23°C (73.4℉); Max:7 days. If maximum overcoat
              重涂時間
              最短:23°C 時10小時;最長:7天。
              Ambient temperature
              Min: 5°C ;Max:40°C
              環境溫度
              最低:5°C;最高40°C
              Substrate temperature
              Min: 5°C ;Max:40°C
              底材溫度
              最低:5°C;最高40°C
              Packing
              Product is a two pack component, available in 1,5 and 25 Kg combined packs.
              包裝
              雙組份 ,包裝規格有1,5,25公斤包裝
              Storage conditions
              The product must be stored in accordance with national regulations. The product should be kept in a cool well ventilated places protected f rom high temperatures. Containers MUST BE kept tightly closed. Shelf life: 1 year.
              儲存及有效期
              產品儲存必須和國際準則一致。產品應在良好的通風處保存,防止高溫。容器必須保持緊緊關嚴。有效期:1年。
              APPLICATION GUIDE
              施 工 指 導
              SURFACE PREPARATION
              PE27,is designed for application over surfaces free of grease, dry spray, dust, and other foreign matters. EURO-PE27 CAN be applied directly on wet or dry surfaces.
              表面處理
              PE27,設計用于沒有油脂、缺釉、塵土和其它雜質的表面上涂裝. PE27可以直接用在干燥或潮濕表面。
              MIXING AND THINNING
              PE27 is a two pack product, both packs containing the proper ratio of ingredients. The entire contents of each container must be mixed together, as supplied. Stir base first to obtain smooth homogenous condition not longer than 3 minutes. Use the total content of each pack. The use of a speed adjustable power mixer is recommended. However, if necessary due to equipment limitation, thinning is allowed with TH03 (max. 3% v/v)
              混合和稀釋
              PE27是雙組份產品,各種成分在使用中有明確的配比;使用時各種成份必須一起混合.首先攪拌基料達到光滑均勻,但時間不得超過2分鐘,基料達到均勻狀態后緩慢地加入固化劑,須連續攪拌三分鐘.使用每罐全部涂料的可使用速度可調的電動攪拌機,過度攪拌會加速固化,降低產品的壽命。不建議進行稀釋.但是,如果由于設備局限性,可以用TH03進行稀釋.
              APPLICATION
              PE27,can be applied by airless spray. CAN BE APPLY OVER WET SUPFACES OR UNDER HUMID CONDITIONS. Ventilation It is very important for the safety of the applicator and the proper performance of EURO-PE27 that good ventilation be provided to all portions of the enclosed area .Dry air IS a must since
              涂裝
              PE27, 可以采用無氣噴涂?稍跐癖砻婊虺睗駰l件下施工通風對于施工人員的安全,密閉區域各部分有良好有通風是很重要的。
              SAFETY
              WARNIGN: Cause eye and skin irritation. Reaction vapour may cause respiratory irritation in sensitive individuals. May cause allergic skin reaction. Avoid breathing vapours. Do not get in eyes on skin or clothing, ear eye and skin protective equipment. Use appropriate respirator, it is recommended to avoid potential respiratory, preferably mouth-to-mouth, and call physician. BURNS: Exothermic reaction causes product to heat which is normal. Be careful handling after mixing product. Use gloves. FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin contact area with soap.
              安全措施
              警告:會引起眼睛和皮膚的刺激.反應的蒸汽可能會引起過敏人群的呼吸道刺激.可能會引起皮膚過敏反應.避免呼吸蒸汽.請勿觸及眼睛、皮膚。要使用眼、耳、皮膚的防護用具,使用合適的面具,以避免潛在的呼吸道刺激。使用后用清水徹底的清洗皮膚。如有不適請咨詢醫生。衣物再次使用前要洗滌。如果沒有呼吸要進行人工呼吸,最好嘴對嘴,并請醫生處理。灼傷:放熱反應會使產品變熱,超出正常水平。在混合后要小心處理。使用手套。急救:如果不慎接觸了眼睛,立即用清水沖洗至少15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚。
              DISCLAMER
              This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated is the sole responsibility of user. The product is intended for professional use only. In case of any doubt, contact your local agent.
              提請注意
              此文件不是正式的技術文件,所列出的信息是可靠的。提供的的每個數值都是作為理論數據從產品的配方中計算出來的。如果需要,可以告知任何上述給出數據的內部常用測量確定方法。由于使用條件非生產商所能控制,這里的信息不做為擔保。產品只是用于專業使用。如有任何問題,請與當地代理商聯系。向生產廠咨詢詳細的施工建議。
              GENERAL
              EURO- PE27 can used be in the moisture condition as an additional layer for anticorrosive coating. which will enhance sealing and anti-corrosion properties. It’s possessed of higher sealing property. In addition, it forms a coating with good resistance to heat and corrosion , this paint is able to match with most pain
              總述
              PE27 用于在潮濕環境施工的中間涂層。增加封閉性和防腐蝕性能。具有較高的封閉性,耐熱性和防腐性良好。與大多數涂料配套。
              RECOMMENDED USES
              steel structure and concrete
              推薦用途
              適用于各種鋼結構和混凝土
              SPECIFICATION DATA
              技 術 參 數
              Vehicle Type/Pigment Type
              Modified epoxy
              漆料類型/顏料類型
              改性環氧
              Colors .
              grey
              顏色
              Mixing ratio
              By weight: 10(base) to 1(curing agent);
              混合比率
              重量比10(基料):1(固化劑)
              Curing agent
              PE27C01
              固化劑
              PE27C01
              Specific gravity(mixture)
              1.42±0.05Kg/dm3 (23℃/73.4℉)
              比重
              1.42±0.05公斤/立方分米
              Volume of Solids
              65% (Theoretical)
              體積固體份
              65%(理論上)
              Flash point(Abel)
              Base:>23°C;Curing agent:>40°C
              閃點
              基底>23°C;固化劑:>40°C
              Theoretical covering capability
              6.5 Sq.m/Lt. at 100 microns (4mils)
              理論覆蓋能力
              6.5平方米/ 升
              Typical film thickness per coat
              Wet:154 microns (6 mils) ;Dry:100 microns (4mils)
              單層膜厚
              濕膜:154um;干膜:100um
              Application method
              Brush, Roller or Airless Spray
              施工方法
              手刷、滾輪刷、無氣噴涂
              Thinner
              Product: TH03- Cleaning: TH03
              稀釋劑
              產品:TH03; 清潔劑:TH03
              VOC
              285 grams/Lt.
              揮發性有機化合物
              285克/升.
              Pot Life (at 23°C /73.4℉)
              4h at 23°C (73.4℉)
              混合使用期
              23°C (73.4℉)時4h
              Drying time
              Surface dry: 2 hours at 23°C (73.4℉)
              干燥時間
              表干:23°C (73.4℉)時2小時
              Overcoating time
              Min:10 hours at 23°C (73.4℉); Max:7 days. If maximum overcoat
              重涂時間
              最短:23°C 時10小時;最長:7天。
              Ambient temperature
              Min: 5°C ;Max:40°C
              環境溫度
              最低:5°C;最高40°C
              Substrate temperature
              Min: 5°C ;Max:40°C
              底材溫度
              最低:5°C;最高40°C
              Packing
              Product is a two pack component, available in 1,5 and 25 Kg combined packs.
              包裝
              雙組份 ,包裝規格有1,5,25公斤包裝
              Storage conditions
              The product must be stored in accordance with national regulations. The product should be kept in a cool well ventilated places protected f rom high temperatures. Containers MUST BE kept tightly closed. Shelf life: 1 year.
              儲存及有效期
              產品儲存必須和國際準則一致。產品應在良好的通風處保存,防止高溫。容器必須保持緊緊關嚴。有效期:1年。
              APPLICATION GUIDE
              施 工 指 導
              SURFACE PREPARATION
              PE27,is designed for application over surfaces free of grease, dry spray, dust, and other foreign matters. EURO-PE27 CAN be applied directly on wet or dry surfaces.
              表面處理
              PE27,設計用于沒有油脂、缺釉、塵土和其它雜質的表面上涂裝. PE27可以直接用在干燥或潮濕表面。
              MIXING AND THINNING
              PE27 is a two pack product, both packs containing the proper ratio of ingredients. The entire contents of each container must be mixed together, as supplied. Stir base first to obtain smooth homogenous condition not longer than 3 minutes. Use the total content of each pack. The use of a speed adjustable power mixer is recommended. However, if necessary due to equipment limitation, thinning is allowed with TH03 (max. 3% v/v)
              混合和稀釋
              PE27是雙組份產品,各種成分在使用中有明確的配比;使用時各種成份必須一起混合.首先攪拌基料達到光滑均勻,但時間不得超過2分鐘,基料達到均勻狀態后緩慢地加入固化劑,須連續攪拌三分鐘.使用每罐全部涂料的可使用速度可調的電動攪拌機,過度攪拌會加速固化,降低產品的壽命。不建議進行稀釋.但是,如果由于設備局限性,可以用TH03進行稀釋.
              APPLICATION
              27,can be applied by airless spray. CAN BE APPLY OVER WET SUPFACES OR UNDER HUMID CONDITIONS. Ventilation It is very important for the safety of the applicator and the proper performance of PE27 that good ventilation be provided to all portions of the enclosed area .Dry air IS a must since
              涂裝
              PE27, 可以采用無氣噴涂?稍跐癖砻婊虺睗駰l件下施工通風對于施工人員的安全,密閉區域各部分有良好有通風是很重要的。
              SAFETY
              WARNIGN: Cause eye and skin irritation. Reaction vapour may cause respiratory irritation in sensitive individuals. May cause allergic skin reaction. Avoid breathing vapours. Do not get in eyes on skin or clothing, ear eye and skin protective equipment. Use appropriate respirator, it is recommended to avoid potential respiratory, preferably mouth-to-mouth, and call physician. BURNS: Exothermic reaction causes product to heat which is normal. Be careful handling after mixing product. Use gloves. FIRST AID: In case of eye contact immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash skin contact area with soap.
              安全措施
              警告:會引起眼睛和皮膚的刺激.反應的蒸汽可能會引起過敏人群的呼吸道刺激.可能會引起皮膚過敏反應.避免呼吸蒸汽.請勿觸及眼睛、皮膚。要使用眼、耳、皮膚的防護用具,使用合適的面具,以避免潛在的呼吸道刺激。使用后用清水徹底的清洗皮膚。如有不適請咨詢醫生。衣物再次使用前要洗滌。如果沒有呼吸要進行人工呼吸,最好嘴對嘴,并請醫生處理。灼傷:放熱反應會使產品變熱,超出正常水平。在混合后要小心處理。使用手套。急救:如果不慎接觸了眼睛,立即用清水沖洗至少15分鐘,并脫去污染的衣鞋,用肥皂清洗接觸后的皮膚。
              DISCLAMER
              This is not a specification and all information is given in good faith. Every values presented as Theoretical were calculated from the product formula If requested, can inform any internal measurement method used to determinate any given value presented. Since conditions of use are beyond the manufacturers control information contained herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated is the sole responsibility of user. The product is intended for professional use only. In case of any doubt, contact your local agent.
              提請注意
              此文件不是正式的技術文件,所列出的信息是可靠的。提供的的每個數值都是作為理論數據從產品的配方中計算出來的。如果需要,可以告知任何上述給出數據的內部常用測量確定方法。由于使用條件非生產商所能控制,這里的信息不做為擔保。產品只是用于專業使用。如有任何問題,請與當地代理商聯系。向生產廠咨詢詳細的施工建議。
              【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
              上一篇:PE36 無溶劑環氧通用底漆 下一篇:ES301 無溶劑耐潮濕型環氧涂料