Specification Data     

技術參數

Binder Type/Pigment Type             Epoxy,thermoplastic polymers/Chemical

and abrasion resistantpigments

基料類型/顏料類型 環氧，熱塑性聚合物/耐化學和耐磨性顏料

Colors                               TE0699(black),TE0660(brown)

顏色 TE0699（黑色），TE0660（棕）

Finish                               Matte

表面 啞光

Mixing ratio                         0.8(base)to 1(curing agent) by weight;

混合比率                             1(base)to 1 (curing agent) by volume

重量比0.8(基料):1（固化劑）;

體積比 1 (基料):1（固化劑）

curing agent CA15

固化劑 CA15

Specific gravity(Mixture)             1.20± 0.03Kg/Lt

比重 1.20±0.03公斤/升

Solids by Volume                      55% (Theoretical)

體積固體份 55%(理論上)

pot life                              5 hours at 23℃73,4℉)

混合使用期                            5小時，23℃條件下

Flash Point(Abel)   Base:>42℃(>108℉);Curing Agent: >30℃(>86℉)

閃點                                     基料：>42℃ ；固化劑：>30℃

Theoretical covering capacity   5.5 Sq.m/Lt. (224 sq.ft/US gal.) at 75 microns (4 mils)DFT

理論覆蓋率 5.5平方米/升，100μm干膜厚度

Typical film thickness per coat Wet:182 Microns (7.2mils); - Dry: 100 microns(4 mils)

單層膜厚                                 濕膜：182μm；干 膜:100μm

Thinner             Material: EURO-thinner TH103;Cleaning: EURO-thinner TH03

稀釋劑                                   材料：TH03，清洗：TH03

VOC                                       >340 grams/Lt

揮發性有機化合物 >340克/升

Drying time                           Surface dry: approx 1 hour (at 23℃(73.4℉)

and 50% relative humidity)

干燥時間                             表干：1小時, 23℃（73.4℉）50%

Overcoating time                       Min:12 hours at 23℃(73.4℉)-Max:7days

重涂時間 最短：12小時，23℃條件下，最大：7天

Recommended primers                    When applying on top of aged coatings,

make sure they are in sound conditions.

推薦底漆                              涂刷在舊涂層上時，確保其狀態良好。

Ambient temperature                 Min.: 5℃(41℉)-Max: 40℃(104℉).Avoid applications

with relative humidity higher than 85%.

環境溫度 最低：5℃，最高：40℃相對濕度不得大于85%

Substrate temperature               Min: 4℃(7℉) above the Dew Point; Max: 40℃(104℉).

底材溫度                            最低：露點以上4℃      最高：40℃

Storage and shelf life                      The product should be kept in a cool well ventilated places

儲存及有效期                   protected  from high temperatures. Containers MUST BE

kept tightly closed.  Shelf life: 1 year.