<big id="fdfpb"></big><big id="fdfpb"><progress id="fdfpb"><font id="fdfpb"></font></progress></big>

      <big id="fdfpb"><sub id="fdfpb"><thead id="fdfpb"></thead></sub></big>

      <big id="fdfpb"></big>
              <address id="fdfpb"><thead id="fdfpb"></thead></address><big id="fdfpb"><progress id="fdfpb"><meter id="fdfpb"></meter></progress></big>

              <progress id="fdfpb"><meter id="fdfpb"><menuitem id="fdfpb"></menuitem></meter></progress>

              <address id="fdfpb"></address>

              Product Center 產品中心

              新聞中心

              當前位置: 首頁 > 新聞中心
              鋁粉環氧涂料使用特點介紹
              來源: 點擊數:521次 更新時間:2023/12/5 15:21:29
              產品名稱:OMELON PE03
              產品介紹:

              SPECIFICATION  DATA

              技 術 參 數

              Binder Type/Pigment Type           Epoxy/amines with anticorrosive aluminum pigments

              基料類型/顏料類型                環氧/胺樹脂/防銹鋁粉

              Colors                             Grey Aluminum

              顏色                               鋁灰                                       

              Finish                             Semi-gloss

              表面                               半光

              Mixing ratio                       2.8(base) to 1(curing agent) by weight 

                                                 2.6(base) to 1 (curing agent) by volume

              混合比率                           重量比2.8(基料):1(固化劑)

                                                 體積比2.6(基料):1(固化劑)

              Curing agent                       CA23

              固化劑                             CA23

              Specific gravity                   1.18±0.03Kg/Lt

              比重                               1.18±0.03公斤/

              Solid by Volume                    85%(theoretical)

              體積固體份                         85%(理論值)

              Pot Life                       4 hours at 23℃(73.4 )

              混合使用期                          4小時,23(73.4)

              Flash point(Abel)                   Base: >25℃( >77); Curing Agent: >43>109

               閃點                               基料:>25;固化劑:>43

              Theoretical covering capability     8.5 Sq.m/Lt.(347 Sq.ft/US Gal) at 100 microns (4 mils) DFT   

              理論覆蓋能力                        8.5平方米/升,100μm干膜厚度

              Typical film thickness per coat   Wet: 118 microns (4.7 mils); - Dry: 100 microns (4 mils)

              單層膜厚                            濕膜:118μm ;干膜:100μm  

              Thinner                             Material: EURO-thinner TH03 Cleaning: Euro-thinner TH03   

              稀釋劑                              材料:TH03  清洗劑:TH03                           

              VOC                                 183 grams/Lt

              揮發性有機化合物                    183/

              Drying time                        Surface dry: approx. 4 hour (at 23℃(73.4 )

                                                 and 50% relative humidity)

              干燥時間                           表干:4小時,23℃73.4℉50%的相對濕度

              Overcoating time                 Min:16 hours at 23℃(73.4 ) ?Max: 10 days

              重涂時間                            最短:16小時/23- 最長:10

              Recommended primers                 Self

              推薦底漆                            本產品

              環境溫度                            低:10℃,最高:50℃,相對濕度不能超過85%

              Substrate temperature              Should be 4℃(7) above the Dew Point

              底材溫度                            高于露點以上4℃(7℉)

              Storage and Shelf life                         The product should be kept in a cool well ventilated places

                                                                              protected  from high temperatures. Containers MUST BE

                                                                              kept tightly closed.    Shelf life: 1 year.

              儲存及有效期                       產品保存于陰涼、通風良好的地方,避免溫度過高。 容器必須牢固密封。 有效期:1年。

              【刷新頁面】【加入收藏】【打印此文】 【關閉窗口】
              上一篇:防腐涂料哪些特性 下一篇:耐潮濕無溶劑型環氧底漆知識點分享